Customization: | Available |
---|---|
Usage: | Workstation, Server |
Type: | Wired |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Absolute MaximumRatings | |||||
Parameter | Symbol | Min | Max | Units | Notes |
Storage Ambient Temperature | Tstg | -40 | +85 | ºC | Exceeding the AbsoluteMaximumRatings may cause irreversible damage tothe device. The device isnot intended to be operatedunder the condition of simulta- neous Absolute MaximumRatings, a condition which may causeirreversible damage to the device. RHisNon-condensing condition. |
RelativeHumidity - Storage | RHS | 0 | 95 | % | |
RelativeHumidity - Operating | RHO | 0 | 85 | % | |
Module Supply Voltage | VCC | -0.5 | 3.6 | V |
Recommended Operating Conditions | ||||||
Parameter | Symbol | Min | Typ | Max | Units | Notes |
Case Operating Temperature | Tcase | 0 | +25 | +70 | ºC | |
Module Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | |
Signaling SpeedPer electrical- channel(4x10GNRZ) | S | - | 10.3125 | - | Gb/s | |
Power Consumption | P | - | - | 3.5 | W | |
DataRate | BR | - | 10.3125 | 11.3 | Gbps |
Transmitter Optical Characteristics | |||||||
Parameter | Symbol | Test Point | CC-QJJ110L-SD | Units | Notes | ||
Min | Typ | Max | |||||
AverageLaunchPower,each lane | POUT | TP2 | -6.2 | - | 4 | dBm | AverageOptical Output |
Optical modulation Amplitude, eachlane | OMA | TP2 | -4.2 | - | 3 | dBm | |
Optical Output with TxOFF | POFF | TP2 | - | - | -30 | dBm | |
ExtinctionRatio | ER | TP2 | 3 | - | - | dB | |
Center Wavelength1 | λ | TP2 | 840 | 850 | 868 | nm | |
Center Wavelength 2 | λ | TP2 | 882 | 908 | 918 | nm | |
RMS Spectral Width | Δλ | TP2 | - | - | 0.65 | nm | |
Optical returnloss tolerance | ORL | TP2 | - | - | 12 | dB | |
20.625 Gb/sEyeMask: X1, X2, X3, Y1, Y2, Y3 | TP2 | {0.3, 0.38,0.45, 0.35, 0.41,0.5} | dB | Note1 | |||
Note1:HitRatio =1.5x10-3;TP1 TX input electrical signalis 10.3125Gbps,pattern 2^9-1. | |||||||
LOSDe-assert Voltage | VLOSD | VEE | - | VEE+0.4 | V |
Receiver Optical Characteristics (4x10GNRZ electrical output) | |||||||
Parameter | Symbol | Test Point | CC-QJJ110L-SD | Units | Notes | ||
Min | Typ | Max | |||||
Averagepower atreceiveinput, eachlane | PIN | TP3 | -8.2 | - | 4 | dBm | Note1 |
Unstressedreceiver sensitivity (OMAouter),eachlane | Sen | TP3 | - | - | -7.1 | dBm | Note2 |
Center Wavelength1 | λ | TP3 | 840 | 850 | 868 | nm | |
Center Wavelength2 | λ | TP3 | 882 | 908 | 918 | nm | |
Receiver Reflectance | RFL | TP3 | - | - | -12 | dB | |
Rx_LOS of Signal - Assert | PA | TP3 | -30 | - | - | dBm | |
Rx_LOS of Signal -Deassert | PD | TP3 | - | - | -5.9 | dBm | |
Rx_LOS of Signal -Hysteresis | PHy | TP3 | 0.5 | - | - | dB | |
Note1: A receivedpower below this value cannotbecompliant;however,avalueabove thisdoesnotensurecompliance. Note 2:BER on theRX side:1E-6. |